Blade Steel: S30V
Handle:
Blade Length:
Weight:
Open Length:

Blade Steel: 14C28N
Handle: Aluminum
Blade Length: 3.4"
Weight: 3.9oz
Open Length: 7.9"

Gerber has been making survival knives for the US Military since 1968. The StrongArm Fixed Blade carries on their legacy of tough-as-hell fixed blade knives for combat and survival applications. Featuring a fine edge, full tang 420HC blade with black ceramic coating, the knife was designed around the fundamentals of military survival training. The diamond texture rubberized handle provides a solid grip in all conditions.

As important as the knife itself is the StrongArm's modular sheath system. The sheath's snap-together components allow the operator to mount the knife vertically on MOLLE, horizontally on a standard 1.75" tactical belt, or in a traditional drop-leg belt mount fashion.

Gerber has been making survival knives for the US Military since 1968. The StrongArm Fixed Blade carries on their legacy of tough-as-hell fixed blade knives for combat and survival applications. Featuring a fine edge, full tang 420HC blade with black ceramic coating, the knife was designed around the fundamentals of military survival training. The diamond texture rubberized handle provides a solid grip in all conditions.

As important as the knife itself is the StrongArm's modular sheath system. The sheath's snap-together components allow the operator to mount the knife vertically on MOLLE, horizontally on a standard 1.75" tactical belt, or in a traditional drop-leg belt mount fashion.

PRODUCT DETAILS
The Disciple ™ is one of Shivworks original design.
Reverse edge method with point down edge in knife.

The Disciple sheath will fit the DCC MOD 4 and DCC MOD 2.1 metal clips.

Training tool was designed to complement your training without a live blade and to mimic live blade carry to work in fight access without fear of cutting or puncturing your training partner. IT IS NOT for striking, or hitting people during training as doing so may cause significant injury even with a blunt metal tip.

Key chain not included

Specifications:
Blade material: Sanvik 12C27 (satin finish)
Handle material: Textured G10
Overall length: 7.5″
Blade length: 3.25″
Handle Length: 4.25″
Blade Thickness: 0.150″
Total Cutting edge length: 3.25″
Weight: 133.8g (4.72 oz with sheath)

Blade Steel: S30V
Handle:
Blade Length:
Weight:
Open Length:

Blade Steel: S30V
Handle:
Blade Length:
Weight:
Open Length:

Blade Steel: S30V
Handle:
Blade Length:
Weight:
Open Length:

Shivworks Clinch Pick Trainer 2.0

Kydex 2 hole sheath and belt loop

New textured handles with flat sides, which reduces the blade from rolling in your hand.

Training tool was designed to complement your training without a live blade and to mimic live blade carry to work in fight access without fear of cutting or puncturing your training partner. IT IS NOT for striking, or hitting people during training as doing so may cause significant injury even with a blunt metal tip.
Key chain not included

Sandvik 12C27 steel, Blue G10 handle.

Designed for the sweet spot of hunter preference; the Benchmade Steep Country is a versatile fixed-blade capable of performing throughout any season, on any species. High visibility Santoprene handles make it easy to keep track of the knife when things start to get Western and provide ample grip in slippery conditions with a redesigned handle texture. With precision in mind, the updated blade thickness and jimping location will make the last cut feel just as effortless as the first.

Specifications

• Blade Length: 3.54" (8.99 cm)
• Blade Thickness: 0.121" (3.073 mm)
• Handle Thickness: 0.58" (14.73 mm)
• Blade Material: CPM-S30V Stainless Steel
• Blade Hardness: 58-60HRC
• Blade Style: Drop Point
• Weight: 3.0 oz. (85.04 g)
• Weight with Sheath: 4.1 oz. (116.22 g)
• Overall Length: 7.76" (19.71 cm)
• Sheath Material: Boltaron
• Class: Hunt
• Made in the USA

(1)

Shivworks Clinch Pick

With new 2 hole sheath for better ergonomics and small size.

Sandvik 12C27 steel, with G10 handle

Clinch Pick, overall length 5 1/2″, blade length 2 5/8″, single edge. Sheath and belt loop included

The Disciple ™ is one of Shivworks original design.
Reverse edge method with point down edge in knife.

The Disciple sheath will fit the DCC MOD 4 and DCC MOD 2.1 metal clips.

Keychain no included

Specifications:
Blade material: Sanvik 12C27 (satin finish)
Handle material: Textured G10
Overall length: 7.5″
Blade length: 3.25″
Handle Length: 4.25″
Blade Thickness: 0.150″
Total Cutting edge length: 3.25″
Weight: 133.8g (4.72 oz with sheath)

The Disciple BLACK ™ is one of Shivworks original design.
Reverse edge method with point down edge in knife.

The Disciple sheath will fit the DCC MOD 4 and DCC MOD 2.1 metal clips and be purchased separately.

Specifications:
Blade material: Sanvik 12C27 (satin finish)
Handle material: Textured G10
Overall length: 7.5″
Blade length: 3.25″
Handle Length: 4.25″
Blade Thickness: 0.150″
Total Cutting edge length: 3.25″
Weight: 133.8g (4.72 oz with sheath)

Toor has updated the Jank Shank frame to better accommodate the new style of textured scale, while keeping its 0.25" steel width. While this adds some weight compared to the previous skeletonized version of the blade (from 2.4 oz to 6.3 oz), the new patterned scales provided increased grip under the most demanding situations. It's the same great EDC knife you've come to love, just newly improved to tackle almost any task you can throw at it.

Every Jank Shank is made in the USA and includes a low profile FlexTech KYDEX® sheath, which is compatible with any of our five mounts.

PLEASE NOTE that the G10 Jank Shank scales are not compatible with previous Limited Edition and regular, skeletonized versions of the Jank Shank.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

(1)

The Viper is a Toor heritage knife classified as a Tactical, Concealable and Everyday Carry blade. Its rounded blade profile provides smooth slicing with a reinforced tip, and its newly redesigned G10 handle is partnered with a full finger ring, which ensures comfort regardless of the position in which it's held.

The butt of the blade has our signature thumb jimping to reduce the chances of slippage when in a reverse hold, and the steep thumb ramp on the spine keeps the hand in place while in a standard hold. This minimal blade is the perfect self defense or concealable tool for your everyday carry.

Every Viper is made in the USA and includes a low-profile black KYDEX® sheath, which is compatible with any of our sheath mounts.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Shivworks Clinch Pick 2.0

New designed handle with textured flat sides, which reduces the blade from rolling in your hand.

With new 2 hole sheath for better ergonomics and small size.

Sandvik 12C27 steel, with G10 handle

Clinch Pick, overall length 5 1/2″, blade length 2 5/8″, single edge. Sheath and belt loop included

Shivworks Clinch BLACK Pick 2.0

PVD black coating.

Textured flat side handle.

Sandvik 12C27 steel, with G10 handle

Clinch Pick, overall length 5 1/2″, blade length 2 5/8″, single edge. Sheath and belt loop included

Blade Steel:
Handle:
Blade Length:
Weight:
Open Length:

This Narrow Pry Tool offers both an eye-catching design and ultimate strength. It's made from 1095 high carbon steel and holds up to all of the uses you could devise for it. The chisel ground edge slides easily between tight surfaces while the width of the handle makes it unobtrusive to hold and use. The Kydex sheath allows the tool to be inserted in either direction and a Soft loop allows for mounting on MOLLE webbing or on a belt. The hole pattern works with a standard belt clip or a Discreet Carry Concepts clip. Winner of the 2022 Blade Show West Best Factory Non-Knife Tool.

Specifications

• Blade Length: 3.75"
• Handle Length: 4.25"
• Overall Length: 8.00"
• Tip Width: 0.180"
• Blade Material: 1095 High Carbon Steel
• Blade Thickness: 0.185"
• Blade Style: Narrow Chisel
• Blade Finish: Acid Wash
• Handle Material: 1095 High Carbon Steel
• Handle Thickness: 0.185"
• Sheath Material: Kydex with Soft Loop
• Weight: 3.39 oz.
• Weight with Sheath: 4.16 oz.
• Designer: Chris Stroup
• Handmade in the USA

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

If you're looking for a tactical blade and space is a premium on your gear, then this is the knife for you, as its slimline FlexTech sheath takes up minimal room. The Serpent's 1.125" ring allows for an easy draw, with or without gloves. The blade is ground with a “tanto” grind, leaving two razor-sharp straight edges, and at 0.1875" thick, is just thick enough to be used as a prying tool, while thin enough to still slide through flesh.

Toor Knives' signature diamond back textured handle eliminates any chance of the blade sliding when wet, while still maintaining smooth contours for maximum comfort when concealed against the body. Made out of CPM-3V tool steel with a black oxide finish and a textured G10 handle, this blade can stand up to the toughest elements with little-to-no corrosion.

Every Serpent is made in the USA and includes a FlexTech Kydex sheath for easy retention adjustability, as well as multiple friction offsets to eliminate blade rattle.

Specifications

• Blade Length: 3.75"
• Handle Length: 4.50"
• Overall Length: 8.25"
• Blade Material: CPM-3V Tool Steel
• Blade Thickness: 0.1875"
• Blade Hardness: 59-61HRC
• Blade Style: Tanto
• Blade Finish: Black Oxide
• Handle Material: Phosphor Green G10
• Sheath Material: FlexTech Kydex
• Weight: 6.7 oz.
• Made in the USA

As a concealable blade with a low profile KYDEX sheath, Toor Krypteia has a proven track record of versatility and protection.

Whether being used as a policing tool on the streets or tucked into the gear of a modern-day operator, this knife provides peace of mind and continues to be one of our all-time best sellers.

Additionally, it’s fitted with a textured handle, that includes a thumb ramp with jimping for reverse drawing the blade, and a lanyard hole for retention cords. The blade is flat- ground almost all the way to the spine, which provides a razor edge and increases sharpening life.

Every Krypteia is Made in the USA and includes a black Tru-Hide KYDEX® sheath, which is compatible with any of our sheath mounts.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Intentionally built for the pursuit of a passion; the 15017 Hidden Canyon Hunter is a small-framed hunt fixed-blade designed for precision cutting tasks. Despite its compact profile, this knife provides ample real estate throughout the handle and cutting edge, making it just as effective on big game as it is on smaller species. The redesigned sheath creates a slim and reliable housing for convenient storage in your pack. Improvements to the overall geometry, ergonomics, and material will make the last cut feel just as effortless as the first with the help of Benchmade's SelectEdge 14° angle.

Specifications

• Blade Length: 2.79" (7.09 cm)
• Blade Thickness: 0.120" (3.048 mm)
• Handle Thickness: 0.55" (13.97 mm)
• Blade Material: CPM-S90V Stainless Steel
• Blade Hardness: 59-61HRC
• Blade Style: Drop Point
• Weight: 3.11 oz. (88.17 g)
• Weight with Sheath: 4.10 oz. (116.24 g)
• Overall Length: 6.42" (16.31 cm)
• Sheath Material: Boltaron
• Class: Hunt
• Made in the USA

The Bravo 5 is a knife made for anything life throws at you. The full tang Bravo 5 has a drop point blade that’s perfect for piercing, chopping, and slicing. This knife is ideal for hunting, camping, and everyday use.

The handle is made from high carbon steel, making it durable to withstand the most challenging conditions.

This knife comes with a Kydex sheath so you can carry it on your belt or backpack strap. In either the horizontal or vertical position.

This knife is a collaboration between Justin Melnick and Stroup Knives, with proceeds being donated to Boot Campaign to help the US Special Forces Community.

This knife will be carried by Justin Melnick on the next season of Seal Team.

• Overall Length: 7.75"
• Blade Length: 3.5"
• Handle Length: 4.25"
• Handle Material: Gray G10 or Wooden
• Blade Material: 1095 High Carbon Steel

Toor is happy to announce that the Vandal is back! After years of being asked to bring back this extremely popular Toor heritage blade, they've finally pulled the trigger, and this updated version is the best variant yet!

With an overall length of 8.375" and a blade thickness of 0.1875", the Vandal is engineered to serve as a compact, mid-sized blade that's optimal for use with a tactical gear belt. The beveled ring design facilitates comfortable handling and enables attachment to a wide range of tactical gear for heightened versatility. This knife can also be easily transferred to a plate carrier or used as an everyday carry defensive tool.

The Vandal Shadow Black features a CPM-3V tool steel blade and a black KG Gunkote finish. While Toor has updated and revamped the Vandal's shape, they've kept their signature Throwback G10 pattern on the scales, which truly creates a rugged aesthetic. Additionally, the Vandal's jimping is a nod to the original design, but with improved ergonomics from the precision machining process.

Each Vandal is made here in San Diego, CA by Toor's skilled and talented manufacturing team and comes with a black FlexTech Kydex sheath. Join the operators from the past and secure this legendary blade for your kit!

Specifications

• Blade Length: 4.125"
• Handle Length: 4.25"
• Overall Length: 8.375"
• Blade Material: CPM-3V Tool Steel
• Blade Thickness: 0.1875"
• Blade Hardness: 59-61HRC
• Blade Style: Harpoon Drop Point
• Blade Finish: Black KG Gunkote
• Handle Material: Machined Shadow Black G10
• Sheath Material: FlexTech Kydex
• Weight: 5.6 oz.
• Made in the USA

(1)

Introducing the Toor Knives Egress, the ultimate tool for those who put everything on the line so that others may live! This knife was born out of a need for a reliable and versatile search and rescue blade. Our team drew on their extensive experience in the military with Survival, Evasion, Resistance, and Escape (SERE) school, as well as first responder career fields to create the perfect tool for the job.

Crafted with hard use in mind, the Egress features a CPM S35VN blade, which is an extremely durable and wear-resistant steel. This is vital for search and rescue, where the blade may need to be used for extended periods of time and in a variety of challenging conditions. CPM S35VN steel has excellent corrosion resistance, making it ideal for use in marine environments or other situations where the blade may be exposed to moisture. At a 0.25” thick, the blade is sturdy and robust enough to handle heavy-duty cutting and prying tasks, such as sawing or cutting with the SERE Hook, as well as breaking through tough materials in an emergency with a new, larger 0.25” diameter tungsten carbide Breacher Ball™ on the pommel.

What truly sets the Egress apart in an overly crowded marketplace, is its unparalleled durability and reliability. It has been designed and built to perform flawlessly in extreme and adverse conditions. If you're in the military, a first responder, a member of a SAR team, or simply someone who wants peace of mind in any situation, this the perfect blade choice.

Each Egress is proudly produced here in San Diego, CA by our skilled and talented manufacturing team and includes a FlexTech KYDEX® sheath.

We are incredibly excited and honored to introduce our newest blade, the Mutiny, which is a Limited Edition collaboration blade between Toor Knives and Skallywag Tactical!

This knife is the result of pooling Toor’s American manufacturing expertise combined with Skallywag’s combative and application competence. Iconic and timeless, The Mutiny is an original concept between the two brands and is purpose built for utility and everyday functionality.

With an overall length of 8.5” and weight of 6.4 oz., the Mutiny was designed as a low-profile EDC tool and pays homage to the golden age of piracy, with some added modern flair. Made from CPM 154 steel, which offers better corrosion and wear resistance, this knife also features billet Aluminum 7075 scales that are 3D textured in a hexagonal pattern and provide additional grip on the high seas. Each handle scale is individually anodized leaving it with a premium color and finish. Additionally, each piece of hardware on The Mutiny is bronze PVD coated 303 stainless steel to ensure absolute structural integrity add value to your ship’s plunder!

Every Mutiny is made by the Toor manufacturing crew in San Diego, CA and each one includes a premium KYDEX® sheath, which is compatible with all Toor mounts and resistant to nature’s roughest waters!